Page 3 of 6
Re: GPU Mining on Intel Apple Mac using XMRig and KawPow
Posted: Wed Oct 27, 2021 3:34 pm
by aenl
@zephyr325 well it never showed the cl accepting a job? And on unMineable it never recognized the worker. It went for several hours without accepting a job.
Re: GPU Mining on Intel Apple Mac using XMRig and KawPow
Posted: Sat Oct 30, 2021 9:11 pm
by industrialspeakage1
industrialspeakage1 wrote: ↑Sun Oct 24, 2021 10:26 pm
With OpenCL / Kawpow: [2021-10-24 15:25:55.223] miner speed 10s/60s/15m 4.87 4.70 4.71 MH/s max 6.15 MH/s
With Random X: [2021-10-24 15:26:16.597] miner speed 10s/60s/15m 3137.3 3013.1 3087.9 H/s max 3306.2 H/s
Is this a good number, or is there something else I should be doing to improve it?
Re: GPU Mining on Intel Apple Mac using XMRig and KawPow
Posted: Wed Nov 03, 2021 1:12 pm
by zephyr325
Well, depending on your CPU speed / quantity of cores, that's not bad - I'm running a 2.6Ghz CPU, and getting about 450 h/s per core that I'm running it on, so yours seems in the ballpark if you're running in on a lot more cores. Just keep an eye on your CPU internal temperature - the research I've done says you should keep the actual CPU average temperature below 212 degrees fahrenheit / 100 degrees celsius as a normal CPU operating temperature. I hit that by reducing the number of cores it runs on in the config.json's CPU section like this:
"cpu": {
"enabled": true,
(other lines)
"argon2": [0, 2, 4, 6],
Re: GPU Mining on Intel Apple Mac using XMRig and KawPow
Posted: Wed Nov 03, 2021 1:25 pm
by Iane
Hi all, Im looking for some help. Im a new miner, whats the best software to use on Mac?
Re: GPU Mining on Intel Apple Mac using XMRig and KawPow
Posted: Mon Nov 15, 2021 4:25 pm
by vija24
Followed all the steps, but getting this error. Any suggestions are appreciated .
![Screenshot 2021 11 15 At 9.52.32 PM](./download/file.php?id=212&sid=1ac52c066b2231f2047da5105175e0dd)
- Screenshot 2021 11 15 At 9.52.32 PM (212.76 KiB) Viewed 31245 times
Re: GPU Mining on Intel Apple Mac using XMRig and KawPow
Posted: Mon Nov 15, 2021 4:59 pm
by zephyr325
A couple of thoughts...this is pointing towards your OpenCL (graphics) setup.
1) Step #4 of this setup - it looks like you're include both the Intel as well as the AMD
GPU in this. You need to stick with just the AMD (#1).
2) If that doesn't fix it, you're going to need to start checking out your OpenCL configuration.
Re: GPU Mining on Intel Apple Mac using XMRig and KawPow
Posted: Thu Nov 18, 2021 4:42 am
by SmallSpark
aenl wrote: ↑Wed Oct 27, 2021 3:34 pm
@zephyr325 well it never showed the cl accepting a job? And on unMineable it never recognized the worker. It went for several hours without accepting a job.
I have the same problem. Everything seems to be working except for my machine accepting a job. Under the KawPow tab on Unmineable, it says that there are no workers present as well. Anybody have an idea as to why this is not working?
Thanks!
Re: GPU Mining on Intel Apple Mac using XMRig and KawPow
Posted: Fri Nov 19, 2021 6:26 am
by watersidepanda
I have the same problem. Everything seems to be working except under the KawPow tab on Unmineable, it says "You have no KawPow workers online."
Did anyone resolve it?
Update: Few Observations:
- Saw the worker show up after some time and then its disappeared... Not sure whats going on....does not seem to be stable...
- very inconsistent with the coin count update on the unmineable dashboard....
- On the command line it shows 3.5 MH/s and on the unmineable dashboard it shows different numbers...
Thanks in advance.
Re: GPU Mining on Intel Apple Mac using XMRig and KawPow
Posted: Sat Nov 20, 2021 3:54 pm
by zcbdfgrg
vija24 wrote: ↑Mon Nov 15, 2021 4:25 pm
Followed all the steps, but getting this error. Any suggestions are appreciated .
![Image](Screenshot%202021-11-15%20at%209.52.32%20PM.png)
Screenshot 2021-11-15 at 9.52.32 PM.png
Your
GPU only has 2gb. Need 3.5gb+ to mine KawPow! So it doesn't look like you'll be able to do it.
![Sad :(](./images/smilies/icon_e_sad.gif)
Re: GPU Mining on Intel Apple Mac using XMRig and KawPow
Posted: Sat Nov 20, 2021 4:02 pm
by zcbdfgrg
watersidepanda wrote: ↑Fri Nov 19, 2021 6:26 am
I have the same problem. Everything seems to be working except under the KawPow tab on Unmineable, it says "You have no KawPow workers online."
Did anyone resolve it?
Update: Few Observations:
- Saw the worker show up after some time and then its disappeared... Not sure whats going on....does not seem to be stable...
- very inconsistent with the coin count update on the unmineable dashboard....
- On the command line it shows 3.5 MH/s and on the unmineable dashboard it shows different numbers...
Thanks in advance.
Can you post a screenshot of when you start
mining? The first 20 or so lines. After dag generation and just when it starts
mining?
I have been using this for months now, completely stable. You WILL notice a difference between what your log tail shows, and what the unmineable site shows. The site will report based on how many shares you have actually found. And sometimes it can be a little while before one is found... But it should always be a steady line!
Good luck!